Range Rover Leather Dye – 250ml
- Restore faded, scratched or worn leather in one easy step
- For coverage up to 2 car seats
- Easily apply with a soft sponge, paint brush or spray
- Built-in satin sealant – No separate topcoat needed
- Colour matched to Range Rover (UK, OEM) car leather interiors
- Can’t find your interior colour? Try our Car Colour Matching Service
Get Me Tomorrow
Restore or recolour your car leather seats
Restore your Range Rover interior with our Leather Dye
Bring your Range Rover’s leather interior back to life with our Land Rover Leather Dye. Whether it’s faded seats, worn bolsters, minor scuffs or light scratches. Our easy-to-use repair solution delivers a professional finish. No need for expensive detailing – just a fast, effective way to restore your Range Rover’s leather to its original look.
Colour-matched to UK OEM Range Rover leather shades, our Premium All-in-One Leather Dye includes a built-in satin sealant for a smooth, durable finish that blends effortlessly into your existing leather which means no top coat is needed as it’s a self sealing product.
From surface touch-ups to full seat restorations, it’s the smart choice for keeping your Range Rover leather interior looking like new.
If you’re unsure of which colour you require contact us via email: sales@thescratchdoctor.co.uk for further support.
Our Range Rover Leather Dye is suitable for
Storing and using our Range Rover Leather Dye
Keep out of reach of children and pets.
Store in a cool dry place away from direct sunlight. Â
Store between 8°C and 30°C
Once opened use within 12 months. Â
PLEASE NOTE: Always test on an inconspicuous area before use. Fully read and understand the instructions provided before use. Not suitable for use on Suede or Nubuck items.Â
How to apply our Range Rover Leather Dye
Step 1
With a lint-free cloth, use our Ultimate Leather Cleaner to clean your car leather, removing any dirt and grease. Apply the Leather Primer to a clean, lint-free cloth and wipe over the leather in circular motions. Ensure the entire surface is evenly covered. It’s normal to see some colour transfer onto your cloth during this stage. Wipe over the surface again with our Ultimate Leather Cleaner. Allow the leather to dry before proceeding.
Step 2
If your leather has any holes or rips, this is the time to use one of our Leather Repair Products before moving on to the next stage. Once the repairs are complete, apply our Premium All in One Leather Dye using a sponge, paintbrush or spray gun, ensuring each coat is applied thinly. Allow each coat to dry fully for 2-3 hours before applying the next coat. To speed up drying time, use a hairdryer on a medium heat setting, keeping it approximately 30cm away from the leather. If there are any creases or folds in the leather, switch the hairdryer to a cold setting to help smooth them out. Drying time may vary depending on cabin temperature.
Step 3
Continue applying thin coats to build up coverage, allowing each coat to dry properly before applying the next. Additional coats will enhance coverage but will not darken the colour. Leave the colour to fully dry and cure for at least 72 hours. After this time, the item can be used as normal. To keep your leather looking its best after recolouring, use our Leather Cleaners and Leather Conditioners for everyday gentle care. However, wait at least four weeks before applying them to ensure the dye has fully cured.




